ASTM B 160 Nickel 200 201 Pure Nickel Round Bar
Δ Product Description
Nickel 200 (UNS N02200)
Overview
Alloy 200/201 is extremely resistance to caustic alkalies up to and including the molten state. The extra-low carbon content
of Alloy 200/201 gives virtual immunity to intergranular attack above about 315°C. The presence of chlorates must be kept
to a minimum, as they accelerate the rate of attack.Commercially pure wrought Nickel with good mechanical properties over
a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.
Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to
caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good
resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry
chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to
temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
| Product Name | nickel 201 nickel alloy bar low price |
| Type: | Bar/Rod/Shaft |
| Outer Diameter | 4-600mm (3/8"-25") |
| Length | 3000mm, 5800mm, 6000mm,12000mm,etc |
| Standard | ASTM,JIS, AISI, GB, DIN, EN |
| Surface | BA,2B,NO.1,NO.4,HL |
| Application | It is widely used in high-temperature and electric industry, medical devices, construction, chemistry, food industry, agriculture, and ship components. It also applies to food and beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen mesh etc. |
| Certification | ISO, SGS, BV |
| Technique | Cold Rolled /Hot Rolled/ Casting |
| Edge | Mill Edge/Slit Edge |
| Grade (ASTM UNS) | N08020,INCOLOY Alloy 20, N08028,INCOLOY Alloy 28, N08330,INCOLOY, Alloy 330, N08800, INCOLOY Alloy 800, N08810, INCOLOY Alloy 800H, N08825, INCOLOY Alloy 825, N06600, Inconel 600, N06601, Inconel 601, N06625, Inconel 625, INCOLOY Alloy 625, N07718, Inconel 718,INCOLOY Alloy 718,N07750,Inconel X750,N04400,MONEL400, Nickl200, S66286, N10276, Hastelloy C-276, N06455, Hastelloy C-4,N06022,Hastelloy C-22,N10665,Hastelloy B-2,N10675, Hastelloy B-3, N06030, Hastelloy G-30, INCOLOY Alloy A286, N08926, INCOLOY Alloy 25-6Mo etc. |
| Grade (EN) | 2.4060 1.4980 1.4529 2.4460 1.4563 1.4886 1.4876 1.4876 2.4858,2.4816 2.4851 2.4856 2.4856 2.4668 2.4669 2.4360 2.4375 2.4819 2.4610 2.4602 2.4617 2.4660 etc. |
| Brand | TISCO BAOSTEEL |
| Delivery time | Within 7-10 Working Days |
| Place of Origin | China (Mainland) |
| Port of Loading | Xingang, China and other Chinese Main Port |
| Price Term | CIF CFR FOB EX-WORK |
| Supply Ability | 5000 Ton/Tons per Month |
| Payment Terms | T/T L/C and Western Union etc. |
| Packaging Details | In bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands |
| Container Dimension | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
Applications
- Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
- Production of viscose rayon. Manufacture of soap.
- Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane
- and ethane.
- Manufacture of vinyl chloride monomer.
- Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.
- Processes using caustic alkalines
- Food Processing
- Synthethic Fiber Production
| Ni | C | Mn | Cu | S | Si | Fe |
| Min99% | Max0.15 | Max0.35 | Max0.25 | Max0.01 | Max0.35 | Max0.4 |
Δ Standards
| Form | ASTM |
| Rod and bar | B 160 |
| Plate, sheet and strip | B 162, B 906 |
| Seamless pipe and tube | B 161, B 829 |
| Welded pipe | B 725, B 775 |
| Welded tube | B 730, B 751 |
| Welding fitting | B 366 |
| Forging | B 564 |
Nickel Alloy Hastelloy B2 Round Bar/Rod
Toleranceh9,h10,h11StandardAISI, ASTM, DIN, EN, GB and JIS
ASTM A276, A484, A564, A581, A582, EN 10272, JIS4303, JIS G 431, JIS G 4311 and JIS G 4318MaterialAlloy: Alloy 20,Alloy 28,Alloy 31;
Hastelloy: Hastelloy B / B-2,Hastelloy B-3,Hatelloy C22,Hastelloy C-4,Hastelloy S,
Hastelloy C276,Hastelloy C-2000,Hastelloy G-35,Hastelloy G-30,Hastelloy X, Hastelloy N;
Haynes: Haynes 230,Haynes 556,Haynes 188;
Inconel: Inconel 600,Inconel 601,Inconel 602CA,Inconel 617,Inconel 625,Inconel 718,Inconel X-750;Carpenter 20;
Incoloy: Incoloy 800 / 800H / 800HT,Incoloy 825,Incoloy 925,Incoloy 926
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
Monel: Monel 400,Monel K500
Nitronic: Nitronic 40,Nitronic 50,Nitronic 60;
Nimonic: Nimonic 75,Nimonic 80A,Nimonic 90 ;
Nickle: Nickle 200/201;
Others: 153Ma,254SMo,253Ma,654SMo,F15,Invar36,1J22,N4,N6 etc
600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D,
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101,LDX2404,LDX4404,904L;Diameter0.5-500mmLength1m-6m or subject to the clients' requestSurfaceBlack, BrightNoteWe can produce other standard as the customers'requirement
Δ Grade Series
| Inconel Series | Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668 Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851 Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856 Inconel 725 / UNS N07725 Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669 Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
| Hastelloy Series | Hastelloy B / UNS N10001 Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617 Hastelloy C Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610 Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602 Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819 Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
| Incoloy Series | Incoloy 925/UNS N09925-Oil Incoloy 825 / UNS N08825 / NS142 / W.Nr 2.4858 Incoloy 800HT / UNS N08811 / W.Nr 1.4954 Incoloy 800H/UNS N08810/W.Nr 1.4876 Incoloy A-286 / UNS S66286 / W. Nr. 1.4980 |
| Monel Series | Monel 400 / UNS N04400 / W.Nr 2.4360 |
| Nickel Series | Nickel 200 / UNS N02200 / W.Nr 2.40 Nickel 201 / GB/T N02201 / W.Nr 2.4060 |
Product Show:
Surface Finishround bar
Surface Finish | Definition and Application |
| No.1 | The surface is finished by heat treatment and pickling or processes corresponding theretoafter hot rolling |
| 2D | The finishes after cold rolling, by heat treatment, pickling or other equivalenttreatment |
| 2B | The finish after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to give an appropriate luster |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror |
| NO.3 | Polished with abrasive belt of grit#100~#200,have better brightness with discontinuous coarse stria |
| NO.4 | Polished with abrasive belt of grit#150~#180,have better brightness with discontinuous coarse stria |
| HL | Polished with abrasive belt of grit#150~#320 on the NO.4 finish and has continuous streaks |
| 8K | The product have excellent brightness and prefect reflexivity can be the mirror |
FAQ:
Q1:How long time is the shortest delivery?
A1:For stock material,the delivery time is just 3-5 working days.
And for customized product,it will takes 25-35 working days based on different size and quantity.
Q2:Can you supply the sample?Does it free or not?
A2:For partial materials,we can supply the sample free(without the freight charge).
If you want to know more details,please contact our sales online.
Q3:What's the terms of payment?
A3:We can accept T/T,100% irrevocable LC at sight,Western Union,etc,
Q4:How to ensure the quality?
A4: We can supply QC,such as MTC,SGS, UT Certificate,etc.
Besides,we have Trade Assurance Amount from Alibaba Group.
If our quality is unapproved,we need and will refund full payment to customers
Q5.How can we get your price ?
We need below information to quote for you:
1. Product Name
2. Standard
3. Material Grade (Chemical Composition)
4. Dimension
5. Quantity
6. The Drawing for Special Parts