We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Scientists from Imperial College London and the University of Central Lancashire have published a new paper in the journal Dental Materials comparing different immediate post-placement particle releases from different dental implants. The paper will help researchers working in the field of dental health to design safer dental implants that avoid post-operational complications.

Study:  Particle release from dental implants immediately after placement – An ex vivo comparison of different implant systems. Image Credit: vipman/Shutterstock.com

Titanium and titanium alloys are commonly used for dental and orthopedic implants. This material is used as it is strong, biocompatible, and durable, and since the introduction of titanium dental implants in the mid-1960s there has been a high treatment success rate using titanium dental implants.

There are some concerns with the use of dental implants, however. Oral peri-implantitis is a common postoperative complication, and problems can occur such as potential bone resorption and loss of implants. This condition has become a research focus in the field of dental medicine.

Oral peri-implantitis was long thought to be caused by the presence of pathogenic oral bacteria, but in recent years evidence has emerged that it is associated with aseptic inflammation at the implant site. Metallic ions and particle release from implants seem to be the cause of this condition. Metallic particle release can occur when implants are screwed into the bone, as well as being released by surface corrosion and normal wear conditions.

Due to there being no established treatment protocols for oral peri-implantitis, controlling the condition is problematic once it occurs. Whilst titanium implants themselves are considered non-toxic, the ions and particles released themselves may be harmful, which can cause further health complications in patients such as chronic inflammation, frustrated phagocytosis, and potentially osteolysis. Implant failure can occur, leading to the need for further surgical intervention and loss of quality of life for the patient.

Researchers have discovered the presence of metallic particles from orthodontic and orthopedic implants in the lungs, spleen, liver, and bone marrow. This could lead to further health complications for patients. Studies are ongoing into investigating the effects of metallic particle release on human health and designing strategies to overcome this issue.

In the paper, the authors have used an ex vivo pork mandible bone model to systematically evaluate the impact of metallic particle release from dental implants. The impact of implant material composition and geometric design on particle release immediately post-placement has been investigated in the research. Materials used in the research were all bone-level implant designs.

Metals evaluated in the research were commercially pure titanium, titanium-zirconium alloy, and a titanium-aluminum-zirconium alloy. Tapered or cylindrical geometries were compared. Furthermore, in vitro investigations of peri-implant internalization of metallic elements by human macrophages and gingival fibroblasts were conducted in the paper.

The authors extensively investigated the effect of the different implants in the study. It was demonstrated in the paper that both geometry and materials selection influence the release rate of metallic particles and ions.

Increased release of metallic elements occurs in wider-diameter implants. This was also demonstrated to be significantly more in titanium-aluminum-zirconium alloys than in commercially pure titanium and titanium-zirconium alloys used in implants with similar dimensions and design. In commercially pure titanium implants, tapered geometries release fewer metallic elements compared to cylindrical ones.

Results of the in vitro peri-implant cell internalization investigations demonstrated that all metallic particle types were absorbed by gingival fibroblasts and macrophages.

The research has demonstrated that commercially pure titanium and titanium-zirconium alloys are more suited to use as dental implants. Additionally, implants with narrower diameters and more tapered geometries (especially in commercially pure titanium) are more suitable. However, there are still some challenges that researchers need to address.

Future research will be needed to provide information on the effects of metallic species and/or fine particles released by dental implants post-procedure on patients. In-depth evaluation of dental implant materials and the risk potential of alloy constituents are vital for research into safer implants to avoid oral peri-implantitis and immune responses which could hinder their use, avoiding the need for further surgical interventions.

Due to the higher metallic element release from titanium-aluminum-zirconium alloys, cytotoxicity studies on this alloy should be a research focus in the future. Overall, this paper is a significant contribution to the field of dental research and the development of dental and osteopathic implants with fewer post-procedure complications.

More from AZoM: What is Bimodal Particle Size Distribution?

Barrak, F et al, (2022) Particle release from dental implants immediately after placement – An ex vivo comparison of different implant systems Dental Materials [online] sciencedirect.com. Available at:

https://www.sciencedirect.com/science/article/pii/S0109564122000926

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Reg Davey is a freelance copywriter and editor based in Nottingham in the United Kingdom. Writing for News Medical represents the coming together of various interests and fields he has been interested and involved in over the years, including Microbiology, Biomedical Sciences, and Environmental Science.

Please use one of the following formats to cite this article in your essay, paper or report:

Davey, Reginald. (2022, May 02). What Particles are Released from Dental Implants After Placement?. AZoM. Retrieved on May 14, 2022 from https://www.azom.com/news.aspx?newsID=58963.

Davey, Reginald. "What Particles are Released from Dental Implants After Placement?". AZoM. 14 May 2022. <https://www.azom.com/news.aspx?newsID=58963>.

Davey, Reginald. "What Particles are Released from Dental Implants After Placement?". AZoM. https://www.azom.com/news.aspx?newsID=58963. (accessed May 14, 2022).

Davey, Reginald. 2022. What Particles are Released from Dental Implants After Placement?. AZoM, viewed 14 May 2022, https://www.azom.com/news.aspx?newsID=58963.

Do you have a review, update or anything you would like to add to this news story?

AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.

In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.

Ahead of their talk on green chemistry and profitability in laboratory research at ChemUK 2022, AZoM spoke with Jacqueline Balian from Gambica and Martyn Fordman from Asynt about encouraging sustainability in the chemical industry.

COXEM's CP-8000+ is a powerful cross section polishing tool that uses an argon ion beam to allow precise, advanced sample preparation. Its state-of-the-art technology means the sample is not deformed and does not suffer any kind of physical damage.

This product profile outlines the Evolution™ Pro UV-Vis Spectrophotometers from Thermo Fisher Scientific.

Extrel’s all-new MAX300-RTG 2.0 is the real-time industrial gas analyzer now redesigned with a touch screen.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022