How is Porous Titanium Used?

2022-05-14 20:28:27 By : Mr. xiujun zhao

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

This article considers porous titanium, with a focus on its properties and applications.  

Image Credit: Alexey Rezvykh/Shutterstock.com

The growth of many industries in the early 1960s, particularly aviation and astronautics, required the development of novel materials. During this time, titanium and titanium alloys also gained attention due to their excellent properties. Since 1910, porous titanium, manufactured using the Hunter technique, has been recognized as a titanium sponge, but it received significant industrial consideration only after the Kroll technique was developed for the industrial manufacturing of titanium sponges.

Commercially used pure titanium and titanium alloys have hexagonal lattice structures, comprise soluble substitutional elements (Al or Sn), and may or may not contain interstitial components (such as O, N, or C).

Porous materials contain empty spaces with varying pore size distributions and pore morphologies. Porous titanium structures with a porosity of up to 98% are feasible (using hollow titanium spheres), and the percentage of pores and the mean pore size vary according to the application. Porous titanium structures having uniform size and shape distribution are classified into three types based upon structure - bimodal structure, gradient structure, and honeycomb structure.

Compared to solid materials, porous structures display distinct operational and mechanical qualities. Relative density (RD) values for porous structures are in the range of 0.003- 0.3. However, when porous titanium is employed in medicine, relative density can range between 0.3 and 0.85. Microporosity is critical in medicine because it increases the implant surface energy during osseointegration.

The Young's modulus of porous materials is dependent on the types of pores in porous materials and stress conditions. Due to the smaller cross-section and stress localization in thin walls of porous materials, the strength of porous materials is significantly reduced compared to solid materials. As a result, compression mode load-bearing structures are primarily utilized in their applications of porous materials such as porous titanium. The compressive strength of porous pure titanium (porosity 50%–70%) may reach 25–5 MPa.

Three phases can be used to characterize the fatigue behavior of porous materials. A gradual change in strain characterizes the first stage, while the second involves the accumulation of the smallest amount of strains, and the last stage results in sample failure after a restricted number of cycles, which is preceded by a fast strain rise. Various studies have observed that the fatigue performance of porous titanium is higher than aluminum and nickel.

Further Reading on AZoM: The Use of Graphene in Dentistry

Permeability indicates a material's ability to transport fluids/gases in the presence of a pressure differential. Darcy's law is used to estimate the permeability of porous materials and the permeability of porous titanium is mainly determined by its fluid and porosity structure.

Titanium and its alloys and other metals exhibit varying degrees of corrosion resistance depending on their chemical structure. Porous titanium shows higher corrosion resistance compared to its solid counterparts, mainly due to the effect of sinters surface oxidation.

Porous titanium is used in aerospace, medical, automotive, space industry, and military applications. In the medical industry, properties of porous titanium like biocompatibility and excellent corrosion resistance are very significant. Commercially available dental implants and bone implants are usually made of solid titanium or porous titanium.

The main reasons for using porous titanium in the aerospace industry are weight reduction, maximum service temperature, excellent corrosion resistance, and the ability to absorb energy.

The lightweight construction of porous metals, their ability to reduce the amount of vibration control required for reciprocating weight, and the lower rotational mass than steel are significant for automobile industry applications. Flue cells, flow systems (fillers, catalytic converters), and electrochemical applications also use porous titanium.

Pure state titanium has inferior mechanical properties but higher corrosion resistance compared to titanium alloys. Numerous studies are now being conducted to devise ways to improve the mechanical characteristics and corrosion resistance of titanium alloys. The majority of these studies are focused on addressing chemical and phase composition optimization.

Recent studies on porous titanium are also focused on its application in the biomedical (implants), automobile, and space sectors. In one of the recent research, porous titanium was used to manufacture porous cranial implants to overcome the limitations of traditional implants. In addition to this, porous titanium has also been integrated with 3D printing technology to improve its utility in the biomedical, aviation, and space sectors.

A fundamental constraint in using porous materials is their cost, which is determined by the raw material and production expenses. Additionally, controlling the morphology of porosity is difficult and subject to unpredictability. Certain alloying elements are not permitted in porous titanium alloys used for medical purposes because of their toxicity or potential for causing severe adverse effects on the human body.

H.P. Tang, J. Wang, Ma Qian, 28 - Porous titanium structures and applications, Editor(s): Ma Qian, Francis H. (Sam) Froes, Titanium Powder Metallurgy, Butterworth-Heinemann, 2015, Pages 533-554, ISBN 9780128000540, https://doi.org/10.1016/B978-0-12-800054-0.00028-9.

K. Pałka, R. Pokrowiecki, M. Krzywicka, Chapter 3 - Porous titanium materials and applications, Editor(s): Francis Froes, Ma Qian, Mitsuo Niinomi, Titanium for Consumer Applications, Elsevier, 2019, Pages 27-75, ISBN 9780128158203,https://doi.org/10.1016/B978-0-12-815820-3.00013-7

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Chinmay Saraf is a science writer based in Indore, India. His academic background is in mechanical engineering, and he has extensive experience in fused deposition-based additive manufacturing. His research focuses on post-processing methods for fused deposition modeling to improve mechanical and electrical properties of 3D printed parts. He has also worked on composite 3D printing, bioprinting, and food printing technologies. Chinmay holds an M.Tech. in computer-aided design and computer-aided manufacturing and is passionate about 3D printing, new product development, material science, and sustainability. He also has a keen interest in "Frugal Designs" to improve the existing engineering systems.  

Please use one of the following formats to cite this article in your essay, paper or report:

Saraf, Chinmay. (2022, January 05). How is Porous Titanium Used?. AZoM. Retrieved on May 14, 2022 from https://www.azom.com/article.aspx?ArticleID=21125.

Saraf, Chinmay. "How is Porous Titanium Used?". AZoM. 14 May 2022. <https://www.azom.com/article.aspx?ArticleID=21125>.

Saraf, Chinmay. "How is Porous Titanium Used?". AZoM. https://www.azom.com/article.aspx?ArticleID=21125. (accessed May 14, 2022).

Saraf, Chinmay. 2022. How is Porous Titanium Used?. AZoM, viewed 14 May 2022, https://www.azom.com/article.aspx?ArticleID=21125.

Do you have a review, update or anything you would like to add to this article?

AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.

In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.

Ahead of their talk on green chemistry and profitability in laboratory research at ChemUK 2022, AZoM spoke with Jacqueline Balian from Gambica and Martyn Fordman from Asynt about encouraging sustainability in the chemical industry.

COXEM's CP-8000+ is a powerful cross section polishing tool that uses an argon ion beam to allow precise, advanced sample preparation. Its state-of-the-art technology means the sample is not deformed and does not suffer any kind of physical damage.

This product profile outlines the Evolution™ Pro UV-Vis Spectrophotometers from Thermo Fisher Scientific.

Extrel’s all-new MAX300-RTG 2.0 is the real-time industrial gas analyzer now redesigned with a touch screen.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022